题目内容 （请给出正确答案）
提问人：网友l******8 发布时间：2023年2月8日 06:34
[]

下列属于沉井施工下沉控制要点的是（）。

A . 下沉应平稳、均衡、缓慢，通过调整开挖顺序和方式纠正偏斜，做到"随挖随纠、动中纠偏"

B . 开挖顺序和方式没有严格要求

C . 按施工方案规定的顺序和方式开挖

D . 进行沉井下沉监控测量

E . 沉井下沉影响范围内的地面四周不得堆放任何东西，减少车辆震动

参考答案
十点题库官方参考答案 （由十点题库聘请的专业题库老师提供的解答）
更多“下列属于沉井施工下沉控制要点的是（）。”相关的问题
简析在确定库房面积时需考虑的因素。
点击查看答案
Android应用程序结构是（）
A . Linux Kernel（Linux内核）
B . Libraries（系统运行库或者是c/c++核心库）
C . ApplicationFramework（开发框架包）
D . Applications（核心应用程序）
点击查看答案
______是评价碾压混凝土压实质量的指标。
A.VC值
B.干湿度
C.相对压实度
D.均匀性
点击查看答案
气滞证发生的原因不包括
A．情志因素
B．外邪阻滞
C．年老体弱
D．脏器虚弱
点击查看答案

维生素是维持机体正常生命活动不可缺少的一类高分子有机物。（      ）

点击查看答案
评价车辆动力性的主要指标是（）．
A.加速时间和加速度
B.加速能力和最大爬坡度
C.最大动力因素
D.最高车速
点击查看答案
下列属于吊装时应遵守的安全措施有（）。
A . 不准酒后作业
B . 工人必须戴安全帽系安全带
C . 使用的钢丝绳应符合要求
D . 安装现场，禁止监理入内
点击查看答案
在重新组装回油孔调节式喷油泵时，为了保证齿条刻度指示的零位与柱塞套筒的实际零位（油泵柱塞直槽对准套筒上的回油孔）一致，生产厂家在（）之间做了对中记号，轮机员必须将两者对齐。
A.齿条和齿套 B.柱塞和套筒 C.齿条与泵体 D.齿条与套筒
点击查看答案
政策性银行发行金融债券应向中国人民银行报送（）文件。 A．金融债券发行申请报告B．发行
政策性银行发行金融债券应向中国人民银行报送（）文件。A．金融债券发行申请报告B．发行人近3年经审计的财务报告及审计报告C．金融债券发行办法D．承销协议

A．金融债券发行申请报告B．发行人近3年经审计的财务报告及审计报告C．金融债券发行办法D．承销协议

B．发行人近3年经审计的财务报告及审计报告C．金融债券发行办法D．承销协议

C．金融债券发行办法D．承销协议

D．承销协议
点击查看答案
生化池曝气时进行的主要反应是（）
A.消化反应
B.反硝化反应
C.沉淀
D.中和反应
点击查看答案
包装按功能通常分为两大类:一类是为促进市场销售而包装,称为工业包装;另一类为了物流运输而包装,称为商业包装。
null
点击查看答案
下列情况暂时不能献血的是（）
A.冠心病
B.慢性支气管炎
C.糖尿病
D.以上都是
点击查看答案
什么叫全绞织？
点击查看答案
将两个及两个年级以上的儿童编在一个班级，直接教学与布置、完成作业轮流交替进行，在一节课内由一位教师对不同年级学生进行教学的组织形式是______。
A.分层教学
B.合作教学
C.小班教学
D.复式教学
点击查看答案
阅读下列广域网路由基本技术的应用，分析路由器的配置命令，将应填入（n)处的内容写在对应栏内。实例
阅读下列广域网路由基本技术的应用，分析路由器的配置命令，将应填入(n)处的内容写在对应栏内。实例：通过Cisco2501 连接A局域网与B局域网，如图5-1所示。假设实验条件如下：A网：202.96.199.0～0202.96.199.255B网：202.97.76.0～202.97.76.31DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

实例：通过Cisco2501 连接A局域网与B局域网，如图5-1所示。假设实验条件如下：A网：202.96.199.0～0202.96.199.255B网：202.97.76.0～202.97.76.31DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

假设实验条件如下：A网：202.96.199.0～0202.96.199.255B网：202.97.76.0～202.97.76.31DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

假设实验条件如下：A网：202.96.199.0～0202.96.199.255B网：202.97.76.0～202.97.76.31DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

A网：202.96.199.0～0202.96.199.255B网：202.97.76.0～202.97.76.31DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

B网：202.97.76.0～202.97.76.31DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

DNS Server：202.96.199.2(主)，202.96.199.3(备)所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

所属域：xxx.com广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

广域网互联：需要一个包含4个IP地址(2个可用IP)的子网，定为：202.98.0.0～ 202.98.0.3，其中202.98.0.1给A网，202.98.0.2给B网，互联专线速率：128kbps。具体网络参数分配表如下：首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

首先进入路由器：将计算机串行口连接到路由器的Console 口，使用Netterm 或者超级终端之类的软件登录。Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router＞enpasswd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

passwd：******(输入超级口令)全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

全局配置：(A、B网相同)Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router config terminal(切换到配置状态)Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router (config)enable secret my-root-password(定义超级口令)Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)ip host Router-A(定义路由器名，B网为Router-B)Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)ip domain-name (1)Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)nameserver 202.96.199.2(定义主域名服务器)Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)nameserver202.96.199.3(定义备域名服务器)Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)ip classlessRouter(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)line (2)(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

(定义5个telnet虚终端，即可以同时有5个人登录本路由器)Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(con6g—1ine)password my-telnet-password(定义telnet口令)Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(conhZ-line)exitRouter(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router(config)exit地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

地址和路由配置：/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

/***** A网路由器 ******/Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-Aconfig terminal(切换到配置状态)Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config)interface e0(配置Ethernet 0 口)Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(comfig-if)ip address (3)Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)noshutdown(激活端口)Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)exitRouter-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config)interface s0(配置 Serial 0 口)Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)descdption the WAN port link to Router-B(端口说明)Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)bandwidth 128(定义端口速率，单位：kbps)Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)no shutdown(激活端口)Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config-if)exitRouter-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config)ip route (4)Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-A(config)exitRouter-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-Awr m(保存配置)/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

/***** B网路由器 ******/Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-Bconfig terminalRouter-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config)interface e0Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)description the LAN port link to my local network(端口说明)Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)ip add 202.97.76.1 255.255.255.224(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

(定义以太网IP地址，子网掩码表示为拥有32个地址的子网)Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)exitRouter-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config)interface s0Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)escdption the WAN port link to Router-A(端口说明)Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)ip add 202.98.0.2255.255.255.252Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)bandwid 128Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)no shutdownRouter-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config-if)exitRouter-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config)ip route (5)Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-B(config)exitRouter-Bwr m(保存配置)配置完成。

Router-Bwr m(保存配置)配置完成。

配置完成。
点击查看答案
客服
TOP